Panasonic 56" 4 Blade DC Motor Ceiling Fan [F-M14MEVBKH]

Panasonic 56" 4 Blade DC Motor Ceiling Fan with nanoe™ X and ECONAVI [F-M14MEVBKH]

Features : 

• Ceiling fans lower the temperature in the room by approximately 3°C (comparing breeze and without breeze)

• nanoe™ X : 

  • a fine (5 to 20nm) water particle containing many hydroxyl radicals

  • releases these water particles to inhibit viruses, bacteria, odours, allergens, mould, PM 2.5 and pollen

• DC Motor :

  • mono form exterior with a built-in PCB (Printed Circuit Board)

  • high motor power output : produces plenty of air volume and wide air flow

  • energy saving compared to AC motor

  • quiet operation

  • small, compact and light DC Motor

• ECONAVI (intelligent microprocessor) : 

  • sensor detects the ambient temperature every 3 minutes

  • adjusts the fan speed as the temperature rises and falls

  • energy saving

• 1/f Yuragi function

  • fans are equipped with fluctuating pattern of air velocity and wind force to generate a gentle breeze

• Remote control with LCD screen (uses two AAA bateries)

  • Buttons : ​

    • ​ON / OFF, 1/f Yuragi, Timer, Time setting, Fan speed (1 - 9), Sleep mode, Auto mode (ECONAVI mode)

• ​1 year warranty​

Specifications :

• 4 blades

  • Glass reinforced polypropylene (PPG) fan blade

• Width : Ø 1400 mm (56")

• Height : 314 mm

• Air velocity : 185 (m / min)

• Air delivery : 225 (m³ / min)

• Remote control (9 speed) : 

  • 1 - 8 hour on / off timer

  • 2 - 8 hour sleep timer

• Fan speed (RPM) : 81 (low), 239 (high)

• Power consumption (W) : 4 (low), 43 (high)

• Colour : Black

​​​

Note :

• Before using this appliance, read the operating instructions of this appliance.
• Children cannot play with this appliance.
• Electrical and installation work needs to be carried out by qualified personnel. 
• Ensure that the ceiling hook can sustain more than 10 times the weight of the ceiling fan.
• Avoid fixing the fan inside the dome ceiling.
• Ceiling fan must be mounted above 2.5 m from the floor and 1 m from the wall to the fan blade. 
• Do not install the ceiling fan at oily, dusty places, windy, wet, high vibration areas, flammable areas, places containing chemicals and alkali. 
• Do not damage the wire during installation.
• Do not paint the fan blades.
• Do not touch the ceiling fan while the fan is operating.
• Do not sprinkle water on the ceiling fan.
• Do not expose yourself continuously to direct wind from the ceiling fan.
• Switch off the power supply and wait until the blades are fully static, before cleaning or doing any maintenance job. 
• Keep the ceiling fan clean.
  • Wipe away dirt with a clean soft cloth, ordinary soap and water. Wipe it again to dry it. 
  • Do not use solvents and chemicals to clean the fan.
  • Do not bend the fan blade while cleaning. 
• Stop using the ceiling fan when any abnormality or failure occurs and turn “OFF” the Miniature Circuit Breaker (MCB).
• If there are unusual oscillating movement, immediately stop using the ceiling fan and contact the manufacturer, service agent or qualified personel.