Panasonic 80" 8 Blade DC Motor Ceiling Fan [F-M20LYVBKRH / SH]

Canopy Type [F-M20LYVBKRH]

Pipe Type [F-M20LYVBKSH]

Panasonic Big 80" 8 Blade DC Motor Ceiling Fan with Motion Sensor

Features : 

• Ceiling fans lower the temperature in the room by approximately 3°C (comparing breeze and without breeze)

• Motion sensor :

  • ​​changes the fan speed according to human activity (high / low / no motion)

  • motion sensor coverage : 4 m width, 2.5 m to 3 m height

  • reduces over operation and reduces waste electricity

• Twin DC Motor :

  • ​high motor power output : produces plenty of air volume and wide air flow

  • energy saving compared to AC motor

  • quiet operation

  • small, compact and light DC Motor

• 1/f Yuragi function

  • fans are equipped with fluctuating pattern of air velocity and wind force to generate a gentle breeze

• Remote control with LCD screen (uses two AAA bateries)

  • Buttons : ​

    • ​ON / OFF, 1/f Yuragi, Timer, Time setting, Fan speed (1 - 9), Sleep mode, Sensor mode

• ​​Bigger fan blade : higher and wider air delivery

• Multi-level safety protection : 

  • Prevention of body falling off : Safety wire, cut-off safety switch

  • Prevention of blade falling off : Safety blade hook

  • Prevent motor from overheating : Safety fuse

• ​1 year warranty

Specifications :

• 8 blades

  • Glass reinforced polypropylene (PPG) and metal fan blade

• Width : Ø 2000 mm (80")

• Height :

  • 446 mm [Canopy type : F-M20LYVBKRH]

  • 702 mm [Pipe type : F-M20LYVBKSH]

• Air velocity : 170 (m / min)

• Air delivery : 360 (m³ / min)

• Remote control (9 speed) : 

  • 1 - 8 hour on / off timer

  • 2 - 8 hour sleep timer

• Fan speed (RPM) : 50 (low), 150 (high)

• Power consumption (W) : 3 (low), 60 (high)

• Voltage (V) : 240 

• Frequency (Hz) : 50

• Colour : Black

• Variation :

  • Canopy Type [F-M20LYVBKRH]

    • ​Net Weight (kg) : 13.3

  • Pipe Type [F-M20LYVBKSH]

    • ​Net Weight (kg) : 13.5

Image 1 : Canopy Type [F-M20LYVBKRH]

Image 2 : Pipe Type [F-M20LYVBKSH]​​​

Note :

• Before using this appliance, read the operating instructions of this appliance.
• Children cannot play with this appliance.
• Electrical and installation work needs to be carried out by qualified personnel. 
• Ensure that the ceiling hook can sustain more than 10 times the weight of the ceiling fan.
• Avoid fixing the fan inside the dome ceiling.
• Ceiling fan must be mounted above 2.5 m from the floor and 1 m from the wall to the fan blade. 
• Do not install the ceiling fan at oily, dusty places, windy, wet, high vibration areas, flammable areas, places containing chemicals and alkali. 
• Do not damage the wire during installation.
• Do not paint the fan blades.
• Do not touch the ceiling fan while the fan is operating.
• Do not sprinkle water on the ceiling fan.
• Do not expose yourself continuously to direct wind from the ceiling fan.
• Switch off the power supply and wait until the blades are fully static, before cleaning or doing any maintenance job. 
• Keep the ceiling fan clean.
  • Wipe away dirt with a clean soft cloth, ordinary soap and water. Wipe it again to dry it. 
  • Do not use solvents and chemicals to clean the fan.
  • Do not bend the fan blade while cleaning. 
• Stop using the ceiling fan when any abnormality or failure occurs and turn “OFF” the Miniature Circuit Breaker (MCB).
• If there are unusual oscillating movement, immediately stop using the ceiling fan and contact the manufacturer, service agent or qualified personel.